Monte Carlo Fan Company 5MMR54 Manual De Usuario

Install wall control unit to outlet box

using machine screws provided.

Attach front cover to wall control

with screws provided.

Remove cover by snaping off from

top or bottom. Install 12V battery

into wall remote. Duracell MN21 /

Eveready A23 / GP 23A all 12V.

Attach cover of remote by placing

over buttons and snaping into place.

Loosen 3 screws with key slots and remove the

screwwithout key slot. 

Take plate and place over the 3 screws with key

slots  and twist to hold in place. Replace the

screw removed and tighten all 4 screws secure-

ly holding the plate.

Loosen 3 screws with key slots. Attach fitter by

placing over screws and twisting clockwise into

place. Tighten all 3 screws securely.  

Plug white wire from fan to white wire  from

light kit. Then plug black from fan to black from

light kit.

Attach glass by locating dimples in light kit and

aligning it with the groves in glass and twisting

clockwise till tight.

Install the 2 50 watt halogen bulbs. Do not

touch bulb surface as oily residue from skin can

cause the bulb to explode.

If you choose not to use light kit. Loosen 3

screws with key slots and remove the 1 without

slots.  Attach switch cap holder by placing over

screws and twisting clockwise into place.

Replace screws removed and tighen all screws

securely. Place switch cap cover over switch

cap holder and tighen screw to hold in place.

To control fan speed select from High, Medium

or low speed buttons.  To turn the fan off press

the Fan on / off button.  To dim upper lights

press and hold U/L botton.  To dim Lower lights

press and hold D/L button.  To turn off either

up or down light press and quickly release

either U/L or D/L button.  Press button marked

REV to reverse the rotation direction of the fan

blades

Fan speed

control but-

tons

Fan on / off

Light dim-

mer for up

and down

lights

Fan

reverse

button