Hunter Fan 42656-01 Manual De Usuario

42656-01 • 08/14/09 • Hunter Fan Company

Downrod 

Canopy

Set Screw

 

 WARNING:  Fan may fall if not assembled as directed in these 

installation instructions.

3-1. Unbundle the wires from the fan.
For Standard or Angled mounting:
3-2.  Insert the downrod through the canopy and canopy trim ring. 

Feed the wires from the fan through the downrod on one side of 
the pin in the ball. 

3-3.  Loosen the square head set screw on the adapter to install the 

pipe and ball assembly. Note: When the pipe and ball assembly 
is fully installed, 2-3 threads on the pipe will still be visible; this is
normal. Securely retighten the set screw with a wrench or pliers. 
Go to 4 • Hanging and Wiring the Fan.

     

 CAUTION: The adapter has a special coating on the threads. Do 

not remove this coating; the coating prevents the downrod from
unscrewing. Once assembled, do not remove the downrod.

Canopy 

Trim Ring