Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Tecumseh
  4. LV156EA
  5. Manual De Usuario

Tecumseh LV156EA Manual De Usuario

Descargar
Página de 32
181-1215-14
Four-Cycle Engine • Vertical Crankshaft • Air-Cooled
Page 5
B. Filling Oil Sump
I.
Oil Fill Cap/Dipstick
If your engine has an oil fill cap/dipstick go to step 1. 
If your engine does NOT have an oil fill cap/dipstick, 
see "II. Oil Fill Cap/Plug" instructions.
1.
Be sure engine is upright and level.
2.
Unscrew oil fill cap/dipstick from oil filler tube and wipe 
dipstick clean. See Figures 7 and 8.
3.
Screw oil fill cap/dipstick back into oil filler tube. 
Tighten securely.
4.
Unscrew and remove oil fill cap/dipstick from oil filler 
tube. Note oil level. If oil reading on dipstick is below 
“ADD” mark, slowly add oil to reach “FULL” level. See 
Figure 6 on page 4. Afterward, continue reading 
instructions below.
5.
Screw oil fill cap/dipstick back into oil filler tube. 
Tighten securely.
6.
Wipe away any spilled oil.
 NOTE
To change oil for engines with an oil fill cap/dipstick, see 
"I. Oil Fill Cap/Dipstick" instructions on page 14.
II. Oil Fill Cap/Plug
If your engine does NOT have an oil fill cap/dipstick go to 
step 1. If your engine has an oil fill cap/dipstick, see "I. Oil 
Fill Cap/Dipstick" instructions above.
1.
Be sure engine is upright and level.
2.
Clean area around oil fill cap/plug. See Figure 9.
3.
Unscrew oil fill cap/plug. 
4.
Add oil to overflow point, making sure to avoid spilling.
5.
Screw oil fill cap/plug back into oil fill hole. 
Tighten securely. 
6.
Wipe away any spilled oil.
 NOTE
To change oil for engines without a dipstick, see 
"II. Oil Fill Cap/Plug" instructions on page 16.
Figure 7. Engine With Oil Fill Cap/Dipstick
Figure 8. Oil Fill Cap/Dipstick
Figure 9. Engine With Oil Fill Cap/Plug
1. Spark Plug Cap
2. Spark Plug Wire
3. Oil Fill Cap/Dipstick
4. Starter Cord Handle
5. Fuel Fill Cap
6. Air Cleaner
7. Primer Bulb
8. Carburetor
9. Muffler
1
2
3
4
7
5
6
8
9