Thermo Products OH65FA072DV4B Manual De Usuario

Descargar
Página de 17
 
i
 
I.  SAFETY SECTION 
 
This page contains various warnings and cautions found throughout the Oil Furnace 
Manual. Please read and comply with the statements below.
 
 
 
cWARNING AND CAUTIONS: 
 
cWARNING: This furnace is not to be used as a construction heater. See Page 1. 
 
c  CAUTION MUST BE TAKEN NOT TO EXCEED 90°  ROTATION (OF THE FLUE 
ELBOW) COUNTERCLOCKWISE OR RIGHT FROM THE VERTICAL POSITION. 
See Page 2.
 
 
cWARNING:  The predetermined limit locations on all of the Thermo Pride oil fired furnaces 
have been tested and approved by Thermo Products, LLC. Any attempt to relocate these safety 
controls or replace these safety controls with a control that is not approved, or is incompatible, 
may result in personal injury, substantial property damage or death. See Page 4. 
 
cWARNING: THE HEAT EXCHANGER MUST BE CLEANED BY A QUALIFIED 
SERVICE  PERSON. See Page 7.
 
 
cCAUTION: DO NOT ATTEMPT TO MAKE REPAIRS YOURSELF! See Page 8. 
 
cWARNING: The area around the furnace should be kept free and clear of combustible 
liquids and  material, especially papers and rags. See Page 8. 
 
cWARNING: NEVER burn garbage or refuse in your furnace. Never try to ignite oil by 
tossing burning papers or other material into your furnace. See Page 8. 
 
cWARNING: Thermo Products oil furnaces are designed to burn No. 1 or No. 2 distillate 
fuel oil. NEVER USE GASOLINE OR A MIXTURE OF OIL AND GASOLINE. See Page 
8. 
 
cCAUTION:  DO NOT ATTEMPT TO START THE BURNER WHEN: 
1. Excess oil has accumulated, 
2. The furnace is full of vapors  
 3. The combustion chamber is very hot. 
 IF ONE OR MORE OF THESE CONDITIONS EXIST, CONTACT A QUALIFIED 
SERVICE PERSON. See Page 8.