Shark MV2010 Manual De Usuario
12
TOLL FREE:
1-800-798-7398
Maintaining Your Vac-Then-Steam™
CARE OF YOUR DUST CUP FILTERS
1
Unplug and turn
OFF “O” the
vacuum. Pull out the dust cup. See
page 7 for instructions.
page 7 for instructions.
Lift the filter frame out from the top
of the dust cup. Remove the two
filter layers from the filter frame.
of the dust cup. Remove the two
filter layers from the filter frame.
2
Thoroughly rinse the two filters in
lukewarm water. Squeeze out any
excess water. Air dry for 24 hours
before reusing.
excess water. Air dry for 24 hours
before reusing.
3
Insert a dry filter set into the filter
frame. The order of the filters
impacts your dust cup performance.
Make sure the thick filter is on the
bottom and the thin filter is on top.
impacts your dust cup performance.
Make sure the thick filter is on the
bottom and the thin filter is on top.
Put the frame with the filter set back
into the top of the dust cup.
into the top of the dust cup.
RECOMMENDED MAINTENANCE
SCHEDULE: Using only water,
thoroughly rinse filters every 3
months and dry for 24 hours.
Replace filter set in the
SCHEDULE: Using only water,
thoroughly rinse filters every 3
months and dry for 24 hours.
Replace filter set in the
Vac-Then-
Steam™ once a year. More regular
filter care or replacement may be
required with excessive use.
filter care or replacement may be
required with excessive use.
2
3
1
24
Thin Filter
Thick Filter
Thick Filter
Replacement filter sets have
been provided with your
product. Use one of the
replacement filter sets when
another set is drying.
been provided with your
product. Use one of the
replacement filter sets when
another set is drying.
MV2010_11_IB_ENG_110103.indd 12
11-01-03 1:26 PM