Caldera SST365 Manual De Usuario

Phone 800-725-7711      www.calderacorp.com     Fax 800-962-3072 

10

Select a burner by touching its corresponding ON/OFF key. The ON/OFF keys are arranged to mirror 
the burner locations. The 8 segment LED will blink 

'p'

 for program. Press the up or down arrow. If the 

down arrow is touched the burner will come on at level 

'4'

. If the up arrow is pressed the burner will 

come on 

'H'

 (high). You may then move to the desired setting using the up and down arrow keys.. The 

programming mode (blinking 

'p'

)lasts for 10 seconds. 

 

 

A brief touch to the control arrows will adjust the power by 1/2 increments (21 settings). This is 
indicated by a beep and circular LED to the right of the  seven segment LED. A steady touch will scan 
through the eleven whole number settings.  
Settings L, 1 thru 3 1/2 are the simmer settings, your gas burner will cycle on and off for varying 
amounts of time depending on the setting. All settings of 4 and above produce a steady flame. 

 

A brief touch to the appropriate burner's ON/OFF key will turn the burner off. You can turn all burners 
off at the same time by touching the lock icon for 1 1/2 seconds. 
 

In case of a power failure your unit will not operate. It will "fail / safe". Each burner and the overall 

safety valve will shut the flow of gas of automatically.  

Yellow Flame, call your

gas company for service.

Yellow tipped blue flame,

normal for L.P.

Soft blue flame, normal

 for natural gas.

 

 

Grates and burner caps may be washed with hot soapy water or placed in the dishwasher. If needed, mild 
abrasives may be used. Allow grates and caps to dry well before replacing them. Use care replacing the 
burner caps so as not to damage the thermocouple and the hot wire igniter.