Ariens 915057 Manual De Usuario

Descargar
Página de 60
2 - 6
of charger to positive (+) terminal, and negative (-) lead 
to negative (-) terminal.
ALWAYS disconnect negative (-) cable FIRST and 
positive (+) cable SECOND. ALWAYS connect positive 
(+) cable FIRST, and negative (-) cable SECOND.
A frozen battery can explode and result in death or 
serious injury. DO NOT charge or jump start a battery 
containing frozen fluid. Thaw the battery before putting 
on a charger or jump starting.
ALWAYS keep protective structures, guards, and 
panels in good repair, in place and securely fastened. 
NEVER modify or remove safety devices.
DO NOT change engine governor settings or over-
speed engine.
Fumes from engine exhaust can cause injury or death. 
DO NOT run engine in an enclosed area. Always 
provide good ventilation.
ALWAYS maintain unit in safe operating condition. 
Damaged or worn out muffler can cause fire or 
explosion.
Stop and inspect equipment if you strike an object or if 
there is an unusual vibration. Repair, if necessary, 
before restarting. Never make adjustments or repairs 
with the engine running.
Mower blades are sharp and can cut you. Wrap the 
blade(s) or wear gloves, and use extra caution when 
servicing them. NEVER weld or straighten mower 
blades.
Rotation of one blade may cause rotation of the other 
blades.
Check brake operation frequently. Adjust and service 
as required.
Keep all hardware properly tightened.
Stored energy in springs can cause injury.
Maintain or replace safety and instruction labels, as 
necessary.
Never store the machine or fuel container inside a 
building where there is an open flame, such as a water 
heater.
Shut off fuel (if provided) and allow engine to cool 
completely before storing in closed area or covering 
unit.
Clean grass and debris from unit, especially from 
around muffler and engine, to help prevent fires.
For extended storage, clean unit thoroughly. See 
Engine Manual for proper storage. 
Use only attachments or accessories designed for your 
unit.
Check attachment components frequently. If worn or 
damaged, replace with manufacturer’s recommended 
parts.