Bionaire BAP1700C Manual De Usuario

1. Press the TIMER button until you reach the desired

number of hours you want the unit to operate (2, 4, 6
or 8)

•

The number of hours selected will light up and 
remain illuminated on the control panel. 

•

When time is up, the air cleaner will beep 3 
times and turn off.

2. To CANCEL the timer, press the TIMER button one

more time. You may also cancel the timer operation
by turning the power button off.

The PERMAtech

®

filter is designed to never need

replacement. However, we recommend regular cleaning
for optimal performance.

• Every few weeks, check the condition of the filter. 

• After approximately 3 months of operation, a Filter

Clean Indicator will alert you to clean the filter before
further use.

To clean the filter:

1. Turn off and unplug the air cleaner. 

2. Remove the air inlet grill by pulling on the tab.

3. Remove and examine the foam pre-filter. 

•

If it has collected dust or lint, remove and wash it
in warm soapy water. Rinse and drip dry 
thoroughly before placing it back into the grill inlet.

4. Check the condition of the PERMAtech

®

filters and

remove if dirty.

5. Clean the PERMAtech

®

filter.

•

Using your vacuum cleaner,
run the brush attachment 
along both sides of the filter
and clean between the 
pleated layers (Figure 2). 

A. Inlet Grill

B. Washable Foam

Pre-Filter (1)

C. PERMAtech

®

Filter (2)

D. Filtered Air Outlet

E. Control Panel

F. Filter Check LED

G. Filter Reset Button 

H. Timer Button

I. Timer Leds (4)

J. Ionizer Button

K. Power Button

L. Power/Mode LED’s (3)

M. Auto Button

Figure 1

Figure 2

BAP1700_08EM1.qxd:BAP170008EM1 V.qxd  4/14/08  9:09 AM  Page 9