Mitsubishi Electronics FX3S Manual De Usuario
752
FX
3S
/FX
3G
/FX
3GC
/FX
3U
/FX
3UC
Series
Programming Manual - Basic & Applied Instruction Edition
34 FX3U-CF-ADP Applied Instructions – FNC300 to FNC305
34.5 FNC304 – FLCMD / FX3U-CF-ADP command
34.5.1 Detailed explanation of setting data
Details on the setting data in the FLCMD instruction are as shown below.
*1.
The CompactFlash
TM
card is available in the "mounted" status.
*2.
The CompactFlash
TM
card is unavailable in the "unmounted" status.
Cautions
It is not permitted to use an "RS (FNC 80)/RS2 (FNC 87)"/"ADPRW (FNC276)"/"IVCK (FNC270) to IVMC
(FNC275)" instruction and an "FLCRT (FNC300) to FLSTRD (FNC305)" instruction for the same port.
(FNC275)" instruction and an "FLCRT (FNC300) to FLSTRD (FNC305)" instruction for the same port.
Setting items
Description
Data Type
Contents of instruction for operation
K0 to K63 : Forcibly writes the buffered data of the specified file ID to the CompactFlash
K0 to K63 : Forcibly writes the buffered data of the specified file ID to the CompactFlash
TM
card.
K-1 : Forcibly writes all buffered data to the CompactFlash
TM
card.
K256(H100) : Sets the CompactFlash
TM
card to the mounted status
*1
.
K512(H200) : Sets the CompactFlash
TM
card to the unmounted status
*2
.
K1280(H500) : Clears error codes stored in the CF-ADP.
16-bit binary
n
Channel number used by the CF-ADP
K1 : ch1
K2 : ch2
K1 : ch1
K2 : ch2
16-bit binary
S