Genie SILENTMAX 1000/1200 Manual De Usuario

Remotes provided with this unit can operate other (Intellicode® 1) 

models of Genie® garage door openers . The default Intellicode® 2 setting 

must be changed to Intellicode® 1. (Follow these same steps to change 

Intellicode® 1 back to Intellicode® 2.)

to Intellicode® 1. 

The LED color displayed on the Remote indicates the Intellicode® mode:

Red = Intellicode® 1     Green = Intellicode® 2

***Repeat Step 2 to turn the RED LED on the Remote back to GREEN 

for operation with Intellicode® 2 openers.

 

Once the LED on the Remote turns RED when the button is pressed, 

that button is programmed to the Intellicode® 1.

If your door opener has a black antenna wire and the serial number 

does not start with 10 or higher, the Learn Code Button and  

Indicator LED are located near the antenna. The light lens may need to 

be opened. If you use an external receiver, it may need to be opened 

to access the Learn Code Button and Indicator LED.

If you have questions, see your Genie® instructions for this Intellicode® 1 

model of opener.

NOTE: Choose the Genie® Remote using Intellicode® 1 button for this 

 

activity.  All new Remotes have the button directly above the logo 
preset to Intellicode® 1.  

 

This button is set to Intellicode® 1.

 

Select a Remote button NOT already programmed to 

the Powerhead. Press and hold the button for 10 seconds

(both the RED and GREEN LEDs on the Remote turn ON).

Press and release the Remote button 3 times.

Find the Learn Code Button and Learn Code Indicator LED 

on your older Genie® door opener.

Press the Learn Code Button (the LED on the Opener 

Press the Remote button 2 times (the LED on the Opener

turns OFF).

Press the Remote button again. If the door moves, the 

Remote button is programmed to your opener.

®