Sony 900 Manual De Usuario

7

Chapter 7 Location and Function of Parts and Controls

139

HDC-900/950/930 Series Product Information Manual

g

Sharpens the edges in the picture. Turning the control 
clockwise increases the sharpness. The peaking can 
be adjusted from off to 16 dB.

h

This indicator blinks when the voltage output of the 
camera battery drops. When the battery reaches a 
point that it may no longer be used, the indicator will 
light up. To prevent camera shut down due to the 
battery running down, change the battery as soon as 
possible after this indicator begins blinking.
The threshold battery voltage value to make this 
indicator begin blinking is set by the camera. For 
details, refer to the manual for the camera.

i

Light up when the camera receives a green tally signal.

j

Adjust the viewfinder height using lift-lock release 
knob 2 p together with this knob.

k

Lights up red in response to a red tally signal. Can be 
used to display the camera number by attaching one 
of the supplied number plates (0 through 9).

l

Adjusts the brightness of the external tally lamp. Use a 
screwdriver to turn the control counterclockwise to 
increase the brightness, or clockwise to dim the lamp.

m

Controls the external tally lamp k. When set to ON, the 
external tally lamp will operate. When set to OFF, the 
lamp will not operate (will not light in response to a tally 
signal).

n

Turns the display of the blanking marker on and off.

o

Adjusts the brightness of the red tally lamps c, the 
green tally lamps i, the (attention) indicator b, and 
the BATT (battery) indicator h on the front panel.

p

Adjust the viewfinder height using lift-lock release 
knob 1 j together with this knob.

q

HDVF-C750W: Connect to the camera’s viewfinder 
connector using the supplied connecting cable.
HDVF-C700W: The CAMERA connector is on the 
bottom of the viewfinder. Connect to the camera’s 
viewfinder connector.

r

Clamps the supplied connecting cable.

s

To attach the viewfinder to a camera, the mounting 
wedge is inserted into the V-shaped groove on the top 
of the camera.