Lennox Hearth Brentwood SP Manual De Usuario

EPA Wood-Burning Fireplaces

P/N 850,039M REV. G 11/2008

BRENTWOOD SP

MODEL

BRENTWOOD™

This installation manual will enable you to obtain a safe, efficient and

dependable installation of your fireplace system. Please read and

understand these instructions before beginning your installation.
Do not alter or modify the fireplace or its components under any circum-

stances. Any modification or alteration of the fireplace system, including

but not limited to the fireplace, chimney components and accessories,

may void the warranty, listings and approvals of this system and could

result in an unsafe and potentially dangerous installation.
Lennox Hearth Products wood-burning fireplaces are designed for use

as a supplemental heater. They are not intended for continuous use

as a primary heat source.

INSTALLATION AND

OPERATION INSTRUCTIONS

Listed to standards:
ULC-S610 & UL-127
Report No. 3011202
EPA Cert. No. 537

SAVE THESE INSTRUCTIONS

FOR FUTURE REFERENCE

WARNINGS

•

Hot! Do not touch! The glass and

surfaces of this appliance will be hot

during operation and will retain heat

for a while after shutting off the appli-

ance. Severe burns may result.

•

Carefully supervise children in the

same room as appliance.

•

If small children are present in the home, it

is recommended that this appliance be fitted

with a firescreen kit. See Page 21 for ordering

information.

WARNINGS

•

The fireplace cannot be operated without a door.

Consult your dealer to select the correct door

model.

•

Important! To assure proper alignment of glass

doors: Install this fireplace in a square and

plumb condition, using shims as necessary at

sides and/or bottom.

•

Install the fireplace only as described in these

instructions.

PIBRENTW REV. 11 NOV 2008

Fireplace, also for use in mobile or

manufactured homes with solid fuel only.

/10

/20