Friedrich P08S Manual De Usuario
DRAIN PIPE
NOTICE
This unit can evaporate the condensation and distribute through the exhaust hose automatically.
1. The drain pipe doesn’t have to be installed, when the unit is in cool mode. Please make sure that
the rubber cap is locked on drain hole, when the unit is running.
the rubber cap is locked on drain hole, when the unit is running.
2. When operating the heating function, the “①” rubber cap on drain hole should be pulled out and
proper drain pipe should be installed in order to improve heating.
proper drain pipe should be installed in order to improve heating.
3. When operating the dehumidifying function the “①” rubber cap on drain hose should be pulled
out and proper drain hose should be installed.
out and proper drain hose should be installed.
●
Please remove the air exhaust hose, connect a drain hose to the drain hole and lead the water to
the outside in order to intensify dehumidifying capacity.
※
When the water tank is full,"E4" will be displayed on the display panel. Please remove the rubber
cap“①” of the drain hole to drain out the water first. After drainage is completed, please restart the
unit so unit can operate normally.
unit so unit can operate normally.
12