Friedrich ZQ10 A10B Manual De Usuario

1. Remove the cabinet. (Refer to section 2.1.2)

2. Remove the 3 screws which fasten the

brace.(Refer to section 2.2.1)

3. Remove the screw which fastens the cover cond.
4. Remove the 5 screws which fasten the condenser

and shroud.

5. After discharging the refrigerant completely,

unbraze the interconnecting tube at the condenser
connections.

6. Remove the condenser carefully.
7. Re-install the components by referring to the

removal procedure.
(See Figure 14)

1. Remove the cabinet. (Refer to section 2.1.2)
2. Remove the 2 screws which fasten the evaporator.
3. Move the evaporator sideways carefully.

(Refer to section 2.2.1)

4. After discharging the refrigerant completely,

unbraze the interconnecting tube at the evaporator
connections.

5. Remove the evaporator carefully.
6. Re-install the component by referring to notes.

(See Figure 15)

1. Remove the cabinet. (Refer to section 2.1.2)
2. After discharging the refrigerant completely,

unbraze the interconnecting tube at the capillary
tube.(See caution above)

3. Remove the capillary tube.
4. Re-install the component by referring to notes.

—9—

Discharge the refrigerant system using a
Freon

TM

Recovery System.

If there is no valve to attach the recovery 
system, install one (such as a WATCO A-1)
before venting the Freon

TM

. Leave the valve in

place after servicing the system.