Friedrich P12A Instruccion De Instalación

7

Note: The window adapter kit must be installed and con-
nected for the air conditioner to work properly in Cool mode. 
The window adapter kit is not required when using the unit 
in Dehumidify or Fan modes.
Your window adapter kit has been designed to fi t most stan-
dard vertical and horizontal window applications. However, 
it may be necessary for you to modify some aspects of the 
installation procedures for certain types of windows.
1. Open window.
2.  Place window panel with extensions into windowframe 

and adjust to width of window. 

  Window adapter kit may be installed vertically aswell as 

horizontally. This installaton may also be used for crank 
style windows.

3.  Tighten the four screws on the window panel to secure 

the window panel extensions. 

4. Close window.
5. The window adapter kit should now fi t securely within 

the window frame and you can now attach the air ex-
change tubes. If you are having trouble attaching the air 
exchange tubes, you may attachthe tubes prior to install-
ing the window adapter kit.

1.  Attach the tubes to the window adapter kit.

2.  Attach the other end to the air conditioner. 

To attach air exchange tubes: push tube onto tube adapter 
and twist until the tab is in place in the hole on the tube.

To remove air exchange tubes: twist the end until the tab is 
clear of the hole in the tube and pull off.