Toshiba RAS-07PKVP-E Manual De Usuario
17
EN
• Adjust the air flow direction properly. Failure to do so could cause discomfort
and make an uneven room temperature distribution.
• Adjust the vertical air flow using the remote controller.
• Adjust the horizontal air flow using the remote controller.
• Adjust the horizontal air flow using the remote controller.
Adjusting the vertical air flow
The air conditioner automatically adjusts the vertical air flow direction according
to the operating conditions when AUTO or A mode is selected.
to the operating conditions when AUTO or A mode is selected.
Adjusting the horizontal air flow
Preparation:
• While the air conditioner is operating, you can use the remote controller to
change the air flow in the horizontal (left/right) direction.
To set a selected vertical air flow direction
Use this function when the air conditioner is operating.
a
FIX
button
Hold down or briefly press the FIX button on the remote controller to move
the louver in the desired direction.
the louver in the desired direction.
To set a selected horizontal air flow direction
Use this function when the air conditioner is operating.
b
FIX
button
Hold down or briefly press the FIX button on the remote controller to move
the louver in the desired direction.
the louver in the desired direction.
To automatically swing the air flow direction
Perform this function when the air conditioner is operating.
c
SWING button
Each time you press the SWING button, the air conditioner’s operation mode
is changed as follows:
• The vertical air flow louver swings.
• The horizontal air flow louver swings.
• The vertical air flow louver and horizontal air flow louver swing at the same
Each time you press the SWING button, the air conditioner’s operation mode
is changed as follows:
• The vertical air flow louver swings.
• The horizontal air flow louver swings.
• The vertical air flow louver and horizontal air flow louver swing at the same
time.
• The swinging of the vertical air flow louver and horizontal air flow louver is
stopped.
• Press FIX
to change the center position of the vertical air flow louver
swinging.
• Press FIX
to change the center position of the horizontal air flow louver
swinging.
• To stop the function, press the SWING button.
ADJUSTING AIR FLOW DIRECTION
NOTE
• Change the vertical/horizontal air flow louver direction within the range
indicated.
• In subsequent operations, the vertical/horizontal air flow is automatically set
to the direction that you set the louver using the FIX button.
CAUTION
• The FIX and SWING buttons will be disabled when the air conditioner is not
operating (including when ON TIMER is set).
• Do not operate the air conditioner for an extended period of time with the air
flow direction set downward during the cooling or dry operation. Otherwise,
condensation may occur on the surface of the vertical air flow louver and
cause water dripping.
condensation may occur on the surface of the vertical air flow louver and
cause water dripping.
• Do not move the vertical air flow louver and horizontal air flow louver
manually. Always use the FIX button.
If you move the louver manually, it may malfunction during operation.
If the louver malfunctions, stop the air conditioner once, and restart.
If you move the louver manually, it may malfunction during operation.
If the louver malfunctions, stop the air conditioner once, and restart.
• When the air conditioner is started immediately after it was stopped, the
vertical air flow louver might not move for about 10 seconds.
a
b
b
c
When the vertical air
flow louver is opened with the FIX
button, it reverses direction while
opening.
flow louver is opened with the FIX
button, it reverses direction while
opening.