Graco 965129 Manual De Usuario

Warnings

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Installation

5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Operation

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Maintenance

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Troubleshooting

8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Service

10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Parts

14

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Dimensions

16

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Technical Data

17

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Graco Standard Warranty

18

. . . . . . . . . . . . . . . . . . . . . . 

Graco Information

18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.

This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.

High–pressure fluid from dispense device, hose leaks, or ruptured components will pierce skin. This
may look like just a cut, but it is a serious injury that can result in amputation.  Get immediate surgi-
cal treatment.

D Do not point the dispensing device at anyone or any part of the body.

D Do not put your hand over the end of the fluid outlet.

D Do not stop or deflect leaks with your hand, body, glove, or rag.

D Follow the Pressure Relief Procedure on page 7 before you clean, check, or service the

equipment.

D Tighten all fluid connections before operating the equipment.

D Check the hoses and couplings daily. Replace worn or damaged parts immediately.

Moving parts can pinch or amputate your fingers.

D Keep clear of all moving parts when starting or operating the pump.

D Before checking or servicing the equipment, follow the Pressure Relief Procedure on page 7 to

prevent the equipment from starting unexpectedly.