Graco 3A1334E Manual De Usuario

NOTE: Reference letters and numbers in parentheses in the text refer to callouts in the figures and drawings. 

•

Pump: Use a ground wire and clamp as shown in 
F

. 1. 

a.

Remove the ground screw (Z) and insert 

through the eye of the ring terminal at end of 

ground wire (Y). 

b.

Fasten the ground screw back onto the pump 

and tighten securely. 

NOTE: To order a ground wire and clamp, order Graco 
Part No. 222011.

•

Air and fluid hoses: Use only electrically conductive 
hoses.

•

Air compressor: Follow manufacturer’s recommen-
dations.

•

Dispensing valve: Ground through connection to a 
properly grounded fluid hose and pump.

•

Object being dispensed to: Follow your local code.

•

Solvent pails used when flushing: Follow your local 
code. Use only metal pails, which are conductive, 
placed on a grounded surface. Do not place the pail 
on a nonconductive surface, such as paper or card-
board, which interrupts the grounding continuity.

•

To maintain grounding continuity when flushing or 
relieving pressure, hold a metal part of the dispens-
ing valve firmly to the side of a grounded metal pail, 
then trigger the dispense valve.

To reduce the risk of static sparking, ground the pump 
and all other components used or located in the 
dispensing area. Check your local electrical code for 
detailed instructions for your area and type of 
equipment.

Z

Y

ti16123