3M 7684-S-8 Manual De Usuario

 

4 

78-8117-0985-2 Rev C

3.0 Install Ground Braid

3.1  Select a Scotch® Mastic Strip 2230 from kit and remove white release liners. Using light tension, apply a single 

wrap of mastic around the cable jacket 1/4" (6 mm) from cut edge (Figure 2). Cut off excess.

Semi-Con

Tape Shield

1

ST

 Scotch

®

 Mastic Strip 2230

Cable Jacket

1/4” (6 mm)

Figure 2

3.2  Position preformed ground braid with short tail over tape shield directly adjacent to cable jacket cut edge. 

PLEASE NOTE: The ground braid needs to make full contact with the metallic shield. Position long tail of 

ground braid, extending over cable jacket with solder block over mastic strip (Figure 3). Secure ground braid to 

cable jacket 4 l/2" (114 mm) from cable semi-con edge using vinyl tape (Figure 3). 

Tape  Shield

Ground Braid

Cable Jacket Edge

Vinyl Tape Marker

Semi-Con Edge

Solder Block

1

ST

 Scotch

®

 Mastic Strip 2230

4  1/2  (114  mm)

Figure 3