Graco 256713 Manual De Usuario

Descargar
Página de 28
2
308118
Table of Contents
Warnings
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Installation
5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Operation
9
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Troubleshooting
13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Service
14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Parts
18
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Technical Data
22
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Dimensions
26
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Mounting Hole Layout
26
. . . . . . . . . . . . . . . . . . . . . . . . . . 
Warranty
28
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Graco Information
28
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
Symbols
Warning Symbol
WARNING
T
his symbol alerts you to the possibility of serious
injury or death if you do not follow the corresponding
instructions.
Caution Symbol
CAUTION
This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the cor-
responding instructions.
WARNING
INSTRUCTIONS
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.
This equipment is for professional use only.
Read all instruction manuals, tags, and labels before operating the equipment.
Use the equipment only for its intended purpose. If you are uncertain about usage, call your Graco
distributor.
Do not alter or modify this equipment. Use only genuine Graco parts and accessories.
Check equipment daily. Repair or replace worn or damaged parts immediately.
Do not exceed the maximum working pressure of the lowest rated system component. Refer to the
Technical Data on page 22 for the maximum working pressure of this equipment.
Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the Tech-
nical Data
 section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.
Do not use hoses to pull equipment.
Route hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose
Graco hoses to temperatures above 82
C (180
F) or below –40
C (–40
F).
Wear hearing protection when operating this equipment.
Do not lift pressurized equipment.
Comply with all applicable local, state, and national fire, electrical, and safety regulations.