American Power Conversion Central Air Conditioning System Manual De Usuario
Network Management Card: Quick Configuration
NetworkAIR IR Operation, Maintenance, and Troubleshooting
53
TCP/IP
settings, select the Boot Mode menu. Select Manual boot mode, and then press
E
SC
to
return to the
TCP/IP
menu. (Changes will take effect when you log out.)
4. Set the System
IP
, Subnet Mask, and Default Gateway address values.
5. Press
C
TRL
-C
to exit to the Control Console menu.
6. Log out (option 4 in the Control Console menu).
Note
If you disconnected a cable during the procedure described in “Local access to the
control console” on page 51, reconnect that cable and restart the associated service.
control console” on page 51, reconnect that cable and restart the associated service.