Bacharach 2072-0400 Manual De Usuario

Maintenance 

MAC2000  

 

 

 
Caution: 

it begins to turn red, replace it immediately! You risk damaging the 
identifier sensor if the filter is not replaced. 

 
The refrigerant identifier filter is located on the control panel, directly 
under the Low Side pressure gauge. The filter’s function is to protect 
the refrigerant identifier sensor from contaminates. When this filter 
starts to develop red spots, replace the filter immediately! 
 

1. 

Remove the filter from its holder; then remove the tubing from 
each end. 
 

2. 

Position the new filter so that its flow-arrow points in the same 
direction as the flow-arrow on the control panel. 
 

3. 

Attach the tubing to the new filter, and press the filter back into 
its holder.  

32 

Instruction 2072-0400