Bradford-White Corp BMT2H Manual De Usuario

Page 4

IMPORTANT: The inlet gas pressure to the appliance 

must not exceed 13 in. w.c. (3.2 kPa).

All installations must be made in accordance with:
1) In the U.S., the " National Fuel Gas Code "ANSI 

Z223.1/NFPA54, Latest Edition and all applicable 

local codes as required by the Authorities Having 

Jurisdiction (AHJ), or 

2) In Canada, the "Natural Gas and Propane 

Installation Code", CSA B149.1, latest edition and all 

applicable local codes as required by the AHJ. 
All electrical wiring is to be done in accordance with:

1). In the U.S., the "National Electrical Code" (NEC), 

ANSI/NFPA 70, latest Edition and all applicable local 

codes as required by the AHJ, or

2). In Canada, the “Canadian Electrical Code - Part 

1”, CSA STD. C22.1 and all applicable local codes as 

required by the AHJ. 
This appliance must be electrically grounded in 

accordance with the applicable codes and standards 

referenced above.

Consult the rating plate on the unit. The 

following information describes the model number 

structure.

 

B  M  T  2 = Brute Deluxe

 

H = Hydronic

 

V = Volume Water

 

0  2  0  0 = 199,900 BTU/h input

 

0  3  0  0 = 299,000 BTU/h input

 

0  4  0  0 = 399,900 BTU/h input

 

N = Natural Gas

 

P = Propane

 

A = 0-5000 feet

 

H = over 5000 feet

 

C = Indoor and Outdoor

 

C = On-Off 

(standard)

 

K = Two-stage 

(optional)

 

1 = Revision Level 1

 

B = Glass-lined CI / copper / brz trim 

(std. BMT2V)

 

C = Glass-lined cast iron / copper 

(std. BMT2H)

 

N = Glass-lined cast iron / cu-nickel 

(BMT2H)

 

 

P = Glass-lined cast iron / cu-nickel / brz trim

 (BMT2V)

 

2 = Glass-lined cast iron / copper, brz trim, HLW

 

5 = Glass-lined cast iron / cu-nickel / brz, HLW

 

X = Standard unit

 

X = No Pump

Bradford White's Brute Deluxe appliances are 

covered by a limited warranty. The owner should 

fill out the warranty registration card and return it to 

Bradford White.

All warranty claims must be made to an 

authorized Bradford White representative or directly 

to the factory. Claims must include the serial number 

and model (this information can be found on the rating 

plate), installation date, and name of the installer. 

Shipping costs are not included in the warranty 

coverage.

Some accessory items are shipped in separate 

packages. Verify receipt of all packages listed on 

the packing slip. Inspect everything for damage 

immediately upon delivery, and advise the carrier of 

any shortages or damage. Any such claims should be 

filed with the carrier. The carrier, not the shipper, is 

responsible for shortages and damage to the shipment 

whether visible or concealed.

See Figures 1A and 1B.

The appliance should be located to provide 

clearances on all sides for maintenance and inspection. 

It should not be located in an area where leakage of 

any connections will result in damage to the area 

adjacent to the appliance or to lower floors of the 

structure.

When such a location is not available, it is 

recommended that a suitable drain pan, adequately 

drained, be installed under the appliance. 

The appliance is design certified by CSA-

International for installation on combustible flooring; 

in basements; in closets, utility rooms or alcoves. 

be installed on carpeting. The location for the 

appliance should be chosen with regard to the vent 

pipe lengths and external plumbing. The unit shall be 

installed such that the gas ignition system components 

are protected from water (dripping, spraying, rain, etc.) 

during operation and service (circulator replacement, 

control replacement, etc.). When vented vertically, the 

Brute Deluxe must be located as close as practical to 

a chimney or outside wall. If the vent terminal and/

or combustion air terminal terminate through a wall, 

and there is potential for snow accumulation in the 

local area, both terminals should be installed at an 

appropriate level above grade such that blockage of 

the terminal from accumulated debris or precipitation 

is prevented.