Honeywell S7999B Manual De Usuario

65-0303—05

2

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the 

TRADELINE® Catalog or price sheets for complete ordering number.

If you have additional questions, need further information, or would like to comment on our products or services, please write or 

phone:

1. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).

2. Honeywell Customer Care

1885 Douglas Drive North

Minneapolis, Minnesota 55422-4386

In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Toronto, Ontario M1V 4Z9.

International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France, 

Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.

— MMC Port for installing software upgrades (when 

required)

— LED indicators:

• Power

• COM

— Models available:

• S7999C1008 has white border

• S7999C1016 has blue border

• S7999C1040 has black border

This User Guide is intended to provide a general overview of 

the S7999B or S7999C Operator Interface (OI) Displays. The 

general overview goes to page 20 and the actual configuration 

begins on page 20.

It is intended to guide you through the features and operation 

of the OI Display as you interface with the R7910A or R7911 

Sola control and establish the Parameter points of the system.

Note that this sheet shows all parameters. The actual product 

may have parameters made invisible or Read Only by 

Honeywell as they may not apply to the product.

Use the Product Data Sheet for the Sola Controls (form 65-

0303) as a guide and explanation of the parameters that are 

being programmed.

You can download new software for the OI Display through 

the Internet. Downloading software should only be done when 

recommended by Honeywell. This feature is intended to 

permit field upgrades for bug fixes and to install new features.

Requirements for downloading new software:

• Ethernet connection for Internet access (RJ45 male 

connector). Carefully insert the RJ45 connector into the 

Ethernet jack in the lower right corner on the back of the 

display to ensure no damage to the jack.

• Dynamic IP addressing (from DHCP server).

The above requirements can be checked prior to execution of 

the software upgrade procedure on the Ethernet Setup page 

(see Advanced Setup section). On the Ethernet Setup page a 

connectivity check can be performed to validate whether 

access to the Honeywell server is possible.

The OI Display must be reset to initiate the download 

procedure. Initial boot procedure of the device permits the 

user to enter into Advanced Startup options within the first five 

seconds after power up.

Follow these steps:

1. Select the Advanced Startup Options button. A Warning 

message is displayed. If you don’t want to proceed with 

the software upgrade, you can cancel the procedure at 

this time.

2. Select OK to proceed.

3. Select the “Force Application Update” checkbox.

4. Deselect the “Use Existing Application” checkbox.

5. Select the Continue button.