Hans Grohe 10015XX1 Instrucciones Para El Montaje

Assembly
1.  Flush pipe lines thoroughly.

2.  Place the mixer including the sealing washer in 

position on the basin.

3.  Slip the fixation piece including the washer over 

the threaded pin and tighten the nut.

4.  Connect the supply pipes to the supply valves: 

hot-left; cold-right.

5.  Connect  the  pop-up  rod  to  the  pop-up  waste 

assembly.

Large differences in pressure between the hot and 

cold water supply should be balanced.

Operation
The mixer is actuated by pushing the lever head.

Swivel to the left = hot water,

swivel to the rigth = cold water.

Operating pressure:                      max. 147 psi

Recommended operating press.:     14.7 - 72.5 psi

Test pressure:                               232 psi

Hot water temperature:                  max. 176° F

Recommended hot water temp.:     149° F

Hole size in deck:

Minimum:                                    1 1/4"

Maximum:                                   1 5/8"

hot

cold