Gilson 853 Prospecto

©2004 Gilson, Inc. 303066-02. Printed in the USA. Specifications subject to change without notice. Gilson, Inc., Gilson S.A.S. and Gilson International B.V. are ISO 9001 certified.

Middleton, WI 53562 USA
Telephone:  800-445-7661 or 608-836-1551
Fax: 608-831-4451

19, avenue des Entrepreneurs 
F-95400 VILLIERS LE BEL France

Technical

 

Specifications

HOT, COLD and STANDBY indicator lights

Anodized cast aluminum (T6061 and T5052 H32), stainless steel (300 series), polypropylene

Meets applicable Safety and EMC certif ication standards; UL and CE certif ied

Voltage: 5 and 24V DC

Current rating: 0.2A at 5V or 5.0A at 24V

852: Two Becton Dickinson Falcon™ assay plates, 96-well, shallow, “U-Bottom”

853: 96 f lat-bottom vials, 12 x 32 mm (2 mL)

854: Two Ritter or Beckman microplates, 96-well, deep

Via Programmable Peltier Controller keypad or Gilson control software

4–40°C

11.9 x 33.8 x 16.8 cm (4.7 x 13.3 x 6.6 in.)

*Up to five 85X Series Peltier Racks will fit on the locator plate of a single-probe 215 Liquid Handler.

852: 3.4 kg (7.6 lbs.)

853: 4.9 kg (10.7 lbs.)

854: 3.8 kg (8.4 lbs.) 

POWER indicator light; 25 soft keys

40-character, four-line backlit LCD

Meets applicable Safety and EMC certif ication standards; UL and CE certif ied

Cooling (C): The current temperature of the rack is more than 2°C warmer than the set temperature

Heating (H): The current temperature of the rack is more than 2°C cooler than the set temperature

Initializing (I): The rack is initializing

Ready (R): The current temperature of the rack is ±2°C of the set temperature

Stopped (S): The temperature of the rack is no longer being regulated

Error (E): The rack is in an error state. Contact Gilson for assistance

Programming (P): The rack is in the programming state. Contact Gilson for assistance

Frequency: 50–60 Hz

Voltage: 90–240V

Current rating: 8.0A for 90–120V or 4.0A for 220–240V (max.); 6.0A for 90–120V or 3.0A for 220–240V (typical)

Internal fuses: Five 5A subminiature PC board fuses to be replaced by service personnel only

Via Gilson control software

RS-232 or GSIOC

26.5 x 43.5 x 15.6 cm (10.4 x 17.1 x 6.2 in.)

8.4 kg (18.6 lbs.)

Programmable Peltier Controller

852/853/854 Peltier Racks

For applications or additional information, contact your local Gilson Technical Sales Representative or visit www.gilson.com.