Cooper Lighting IMI-597 Manual De Usuario
These instructions do not claim to cover all details or variations in the equipment, procedure, or process described, nor to provide directions for meeting every possible
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please
contact your nearest representative.
contingency during installation, operation or maintenance. When additional information is desired to satisfy a problem not covered sufficiently for user’s purpose, please
contact your nearest representative.
4. Attach Housing to Upper Flite Arm -
Remove the WIREWAY PLUG from the
HOUSING. Move the fixture leads aside so
the THREADED RODS may be accessed
through the fixture HOUSING.
See Figure 4a.
Attach the UPPER FLITE ARM to the
HOUSING by inserting the threaded studs
into the fixture HOUSING. Feed the fixture
wires through the UPPER FLITE ARM.
Slide the HOUSING over the threaded
rods and secure it with the PLAIN
WASHERS, LOCK WASHERS, and HEX
NUTS. See Figure 4b.
Torque HEX NUTS as follows:
HOUSING. Move the fixture leads aside so
the THREADED RODS may be accessed
through the fixture HOUSING.
See Figure 4a.
Attach the UPPER FLITE ARM to the
HOUSING by inserting the threaded studs
into the fixture HOUSING. Feed the fixture
wires through the UPPER FLITE ARM.
Slide the HOUSING over the threaded
rods and secure it with the PLAIN
WASHERS, LOCK WASHERS, and HEX
NUTS. See Figure 4b.
Torque HEX NUTS as follows:
Medium Icon (ICM) - 450 in-lbs.,
Small Icon (ICS) - 130 in-lbs.
Small Icon (ICS) - 130 in-lbs.
NOTE: It may be helpful to use a deep sock-
et when installing the HEX NUTS.
et when installing the HEX NUTS.
Re-install the WIREWAY PLUG into the
wireway in the HOUSING.
wireway in the HOUSING.
Customer First Center • 1121 Hwy 74 South • Peachtree City, GA 30269
IMI-597 AVU040197
Flite
Sheet 3 of 8
8/31/04
IMI-597
INSTALLATION INSTRUCTIONS
IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.
RETAIN FOR FUTURE REFERENCE.
TM
WARNING:
Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing
or servicing.
or servicing.
WARNING
Risk of Personal Injury
Fixture may become damaged and/or
unstable if not installed properly
unstable if not installed properly
Tighten all fixture components to their
recommended torque values
recommended torque values
Wireway Plug
Fig. 4a
Housing
Upper Flite
Arm
Arm
Fig. 4b