Cooper Lighting CPP/CPS Manual De Usuario

These instructions are valid for both PP and PS mounting

assemblies. Secure both pendant assemblies to ceiling before

attaching fixture head.

1. Remove canopy and allow it to slide down pendant.

2. Refer to power orientation supplementary sheet for power

location.

3. Run wiring from j-box down pendant tube and using

#8-32 x1/2" Pan head screws, secure mounting plate to j-box.

Reinforce J-box with additional bracing.

1. Secure pendant yoke to pendant tube using both pendant
nuts prior to installation.

Mounting non power side pendant

These instructions are valid for both PP and PS mounting

assemblies

1. To secure non-power pendant, remove canopy and allow it

to slide down pendant.

2. Replace #8 Pan head screws with appropriate fasteners(by

others) Use additional bracing to secure pendant.

3. Secure mounting plate on center using dimensions provided

on next page.

Warning

: Before starting any work ensure

that all sources of power are turned off. All

work must meet local/national codes and be

performed by a certified electrician. Do not

mount fixtures vertically.

Installation Instructions

Vault w/ visor

C-Scroll w/ visor

Roundel w/ visor

These installation instructions are valid with the above Ametrix styles.

Sheet 2 of 5

Small, INDOOR

CPP/CPS

(Continuous Pendant)

Visor and Non-Visor

ADY071477 REV A (ECN080352)

PS Exploded assembly

Canopy

PS mounting
plate

#8-32 x1/2"
Screw
(2x)

#10-32 x5/8"
End Screw

Pendant yoke

PP canopy

#8-32 x1/2"
Screw
(2x)

PP mounting
plate

Pendant
nut

1. Secure pendant yoke to pendant tube using both pendant
nuts prior to installation.

PP Exploded assembly

Mounting power-side pendant to J-box

plate

PS mounting

Canopy

(2x)

Screw

(by others)

#8-32 x1/2"

J-box

Run wiring into
pendant tube

PS mounting
plate

PS canopy

#8-32 x1/2"
Screw
(2x)

#10-32 x5/8"
End screw

Pendant yoke

Pendant
nut