Chief Manufacturing CM2L40 Manual De Usuario
Installation Instructions
CM2L40
17
Extended Programming Capabilities
The CM2 allows for extended programming to make the mount
compatible with other devices such as a Universal Remote or
other control devices through a serial connection.
compatible with other devices such as a Universal Remote or
other control devices through a serial connection.
Setting or changing the configuration of the CM2 is done
through the remote control provided with the mount.
through the remote control provided with the mount.
The remote control has a range of 20-30 ft (6-9m), and is
powered by 2 AAA batteries that are accessed from the back of
the remote.
powered by 2 AAA batteries that are accessed from the back of
the remote.
NOTE:
If operation of the mount is required at a greater
distance than remote control will allow, the mount can
be controlled through a hardwired switch or similar
device. See Dry Contact Closures section and (See
Figure 32) .
be controlled through a hardwired switch or similar
device. See Dry Contact Closures section and (See
Figure 32) .
The following table and illustration identify mount functionality
and response by button on the remote control.
and response by button on the remote control.
Normal Operating Mode
Figure 29
1
2
3
4
5
6
7
8
9
10
11
12
13
KEY
FUNCTION
REQUIRED ACTION
1
NOT USED
N/A
2
NOT USED
N/A
3
RAISE DISPLAY
PRESS
4
NOT USED
N/A
5
STOP
PRESS
6
NOT USED
N/A
7
LOWER DISPLAY
PRESS
8
NOT USED
N/A
9
NOT USED
N/A
10
NOT USED
N/A
11
NOT USED
N/A
12
NOT USED
N/A
13
NOT USED
N/A