Chief Manufacturing FSA-1005 Prospecto

 

8804-000133 Rev. D 

 

 

 

09/07/05 

INSTALLATION INSTRUCTIONS 

Prior to assembly, unpack carton completely and verify contents. 

If you are missing any of the following components, please contact Customer Service at 1-800/582-6480 

 

 

(4)  Security Pivot Bolt, 4” 

(4)  M4 x 12mm Security Screw 

(1)  ¼-20 x .25” Security Screw 

(4)  M4 x 20mm Security Screw 

(1)  ¼-20 x .625” Set Screw 

(1)  1/8” Hex Key 

(1) 5/16-18 x .75” Security Set Screw 

(1) 5/32” Security Hex Key 

 

(1) 3/16” Security Hex Key 

1.  Remove and replace existing fasteners on small flat panel mount (dual arm assembly shown for reference) with 

tamper-resistant fasteners (see Figure 2). 

Option I: 

If your wall plate uses a ¼-20 setscrew, replace it using the ¼-20 x .625” setscrew. The existing setscrew in 
the wall plate is too long to be used in conjunction with the ¼-20 x .25” security screw. 

Option II:  If your wall plate uses a 5/16-18 set screw, replace the setscrew with the security version included in this kit. 

 

 

Figure 1 

Figure 2 

4”