Chief Manufacturing FSA-1004 Manual De Usuario
CHIEF MANUFACTURING INC.
8832-000041 Rev. F
1-800-582-6480 952-894-6280 FAX 952-894-6918
©2007 Chief Manufacturing
8401 EAGLE CREEK PARKWAY, STE. 700
SAVAGE, MINNESOTA 55378 USA
03/07
I N S T A L L A T I O N I N S T R U C T I O N S
Small Flat Panel
Lift Arm
FSA-1004 and KSA-1004
BEFORE YOU BEGIN
CAUTION: To prevent damage to the mount, which could affect or void the Factory warranty, thoroughly
study all instructions and illustrations before you begin to install the mount brackets. Pay particular atten-
tion to the “Important Precautions” on Page 2.
study all instructions and illustrations before you begin to install the mount brackets. Pay particular atten-
tion to the “Important Precautions” on Page 2.
If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.
The Lift Arm FSA/KSA-1004 is an accessory that can be
used with a broad range of Small Flat Panel Displays.
used with a broad range of Small Flat Panel Displays.
The FSA/KSA-1004 allows the user to move a display
vertically up or down in a 13 inch radius. The lift arm can
be moved vertically 6-1/2” up from center and 6-1/2”
down from center.
vertically up or down in a 13 inch radius. The lift arm can
be moved vertically 6-1/2” up from center and 6-1/2”
down from center.
The FSA/KSA-1004 is designed to safely hold a display
weighing up to 25 lbs. (11.3kg). The display can be up to
30 inches wide.
weighing up to 25 lbs. (11.3kg). The display can be up to
30 inches wide.
The FSA/KSA-1004 accommodates all VESA®
75mm/100mm compliant displays.
75mm/100mm compliant displays.
Lift Arm