Bacharach ADM800 Manual De Usuario
Instruction 3015-4275
47
Working with the System Screen
The System Screen provides a summary view of the entire AGM300 network. The boxes on the left side of the
screen indicate the status of each AGM300 monitor including the name, the current zone, and whether fault or
alarm conditions are present on the network.
screen indicate the status of each AGM300 monitor including the name, the current zone, and whether fault or
alarm conditions are present on the network.
System Screen
Alarm Conditions
When an alarm condition is detected anywhere on the network the red ALARM LED will glow. Additionally, an
external alarm device may activate and an audible alarm may sound if those features have been enabled
(Pages 28 & 35).
external alarm device may activate and an audible alarm may sound if those features have been enabled
(Pages 28 & 35).
The ALARM box in the upper right hand corner of the screen will blink and the count value will change to
indicate the total number of alarm conditions on the network. To investigate an alarm, press the ALARMS key to
go to the Alarm Summary Screen (Page 50). See Working with Alarms on Page 50 to learn more about
responding to alarms.
indicate the total number of alarm conditions on the network. To investigate an alarm, press the ALARMS key to
go to the Alarm Summary Screen (Page 50). See Working with Alarms on Page 50 to learn more about
responding to alarms.
System Screen (Alarm Mode)
Alarm
Condition
Condition