Honeywell 5820XL Manual De Usuario
IntelliKnight 5820XL Installation Manual
7-4
151209
7.3.1.2 Setting the 5815XL Wiring Class
8. Choose the class of wiring you wish to use for this module by pressing the
or
arrow, then press
.
7.3.2
Adding a Module
If you need to add a new hardware module to the system, follow these steps.
You must be in the Main Menu to perform this task. If necessary, enter the Installer Code.
1. Enter the installer code.
2. Press
or
to display the main menu.
3. Select
for Program Menu.
Display reads:
Initializing
Please wait . . .
4. Press
to enter module menu.
5. Press
to add a module.
6. From the next screen, select the number that corresponds to the type of module you are
adding from the <New Module Type> screen.
The screen will display “Adding module [#]...” for a few moments. You will be returned to
the <New Module Type> screen where you can select another module if desired.
the <New Module Type> screen where you can select another module if desired.
You must save changes when you exit the Program Menu or the new module will not be
added.
added.
Note: If you Add a Module that has not been physically connected, the panel will go into trouble after it
reinitializes (when you exit the Program Menu). When the new module is attached, the trouble will correct
itself automatically the next time you power up the system.
itself automatically the next time you power up the system.
7
1
2