Honeywell 5820XL Manual De Usuario
151209
3-1
Section 3
Before You Begin Installing
Before You Begin Installing
This section of the manual is intended to help you plan your tasks to facilitate a smooth
installation. Please read this section thoroughly, especially if you are installing a 5820XL
panel for the first time.
installation. Please read this section thoroughly, especially if you are installing a 5820XL
panel for the first time.
3.1
What’s in the Box?
The IntelliKnight 5820XL ships with the following hardware:
•
A cabinet with all hardware assembled
•
Two keys for the front door
•
Two keys for user operation of the on-board annunciator (installer operations require the
Installer’s Code)
Installer’s Code)
•
Ten 4.7K ohm end-of-line resistors
•
A battery cable for batteries wired in series
3.2
Environmental Specifications
It is important to protect the 5820XL control panel from water. To prevent water damage, the
following conditions should be AVOIDED when installing the units:
following conditions should be AVOIDED when installing the units:
•
Intended for indoor use in dry locations only
•
Do not mount directly on exterior walls, especially masonry walls (condensation)
•
Do not mount directly on exterior walls below grade (condensation)
•
Protect from plumbing leaks
•
Protect from splash caused by sprinkler system inspection ports
•
Do not mount in areas with humidity-generating equipment (such as dryers, production
machinery)
machinery)
When selecting a location to mount the 5820XL control panel, the unit should be mounted
where it will NOT be exposed to temperatures outside the range of 0°C-49°C (32°F-120°F) or
humidity not exceeding 93% noncondensing.
where it will NOT be exposed to temperatures outside the range of 0°C-49°C (32°F-120°F) or
humidity not exceeding 93% noncondensing.