MartinLogan E2 Manual De Usuario

Assembly     5

WARNING! Assembling the Statement e2

requires two people, except for step 12 of the

subwoofer tower assembly, which requires three

people. Do not attempt any part of the assembly

process with one person.

1

Place the primary subwoofer module in position on the

floor, (the primary module has 10 binding posts). Corner

placement is recommended—it is important to place

the sub towers as close to final position as possible, as the

final assembled tower weighs approximately 500 lb.

However, for assembly you must leave enough space

to have access to all sides of the sub tower. Place a level

in position as shown to level the module left to right.

Adjust the glider pads on the bottom of the cabinet to

achieve level. 

2

Position the level as shown to level the primary mod-

ule front to back, adjusting the glider pads on the

bottom of the cabinet to achieve level. 

3

Pick up a secondary module with an assembler on each

end and place carefully onto the primary module by

lining up the cone feet on the secondary with the

indentations at each corner of the primary module.

Use your index finger as shown to feel when the cone

feet are in position.

A

SSEMBLY

Subwoofer Tower Assembly

Figure 2

Figure 3

Figure 4