Honeywell IPGSM-DPC Manual De Usuario
IPGSM-DPC Commercial Fire Communicator – Installation and Setup Guide
– 2 –
Operation
The IPGSM-DPC replaces the fire panel's POTS communications path. When an event occurs, the fire panel
goes off-hook to dial the central station. The IPGSM-DPC detects the off-hook condition and provides the
goes off-hook to dial the central station. The IPGSM-DPC detects the off-hook condition and provides the
fire panel with a dial tone. When the fire panel detects the dial tone, it begins dialing the central station.
The IPGSM-DPC considers the three second period after dialing as the number dialing has been completed.
After the dialing is completed, the Dialer Capture Module returns a handshake to the fire panel.
The fire panel then sends the contact ID reports to the IPGSM-DPC, which in turn sends a kiss-off after the
After the dialing is completed, the Dialer Capture Module returns a handshake to the fire panel.
The fire panel then sends the contact ID reports to the IPGSM-DPC, which in turn sends a kiss-off after the
report is successfully received from the fire panel. Within the IPGSM-DPC, the Dialer Capture Module
sends the contact ID reports over the ECP bus to the iGSM Communications Module. When all the reports
sends the contact ID reports over the ECP bus to the iGSM Communications Module. When all the reports
are sent, the fire panel goes on-hook. The IPGSM-DPC then transmits the messages to the central station
(either over the internet or the GSM network).