Panasonic SCHT56 Manual De Usuario
5
RQTX0175
Standby indicator [^]
When the unit is connected to the AC power supply, this
indicator lights up in standby mode and goes out when the
unit is turned on.
[8, POWER]
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
When the unit is connected to the AC power supply, this
indicator lights up in standby mode and goes out when the
unit is turned on.
[8, POWER]
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
Main unit
[-MENU,
―SETUP, RETURN]
For entering menus and setup to make various settings.
For returning to previous menus.
For returning to previous menus.
•
•
[TUNE, 2 / 3, 1 / 4]
For tuning the radio and selecting menu or setup items.
•
[TUNE, 2 / 3, 1 / 4]
For tuning the radio and selecting menu or setup items.
[SETUP MIC] jack
For calibration microphone.
For calibration microphone.
[ENTER]
Used during menu or setup operations.
Used during menu or setup operations.
[VOLUME]
Volume control.
[ ] Headphone jack
Plug type:
Volume control.
[ ] Headphone jack
Plug type:
Ø
3.5 mm (
1
/
8
") stereo
Sound does not come from the speakers if you connect
headphones.
Avoid listening for prolonged periods of time to prevent
hearing damage.
headphones.
Avoid listening for prolonged periods of time to prevent
hearing damage.
•
•
1
2
3
4
5
2
3
4
5
6
7
7
8
9
1
2
3
4
5
6
7
8
9
Remote control signal sensor
[INPUT SELECTOR, <, >]
For selecting input.
For selecting input.
10
[AUTO SPEAKER SETUP]
Flashes during Auto Speaker Setup. Lights when the setup
finishes.
Flashes during Auto Speaker Setup. Lights when the setup
finishes.
10
Control guide
Control guide
Display
[ft, kHz, MHz]
Distance and frequency unit indicators
ft: feet (speaker distance)
kHz: AM, or PCM sampling frequency
MHz: FM
kHz: AM, or PCM sampling frequency
MHz: FM
[TUNED, ST, MONO]
Radio indicators
TUNED: A station is tuned
ST: A stereo FM broadcast is tuned
MONO: You have switched to monaural mode to improve
reception
[SLEEP]
Sleep timer indicator.
Radio indicators
TUNED: A station is tuned
ST: A stereo FM broadcast is tuned
MONO: You have switched to monaural mode to improve
reception
[SLEEP]
Sleep timer indicator.
[PCM, C.FOCUS]
PCM: Lights when the PCMFIX mode is set
C.FOCUS: Appears when you are using Center Focus
PCM: Lights when the PCMFIX mode is set
C.FOCUS: Appears when you are using Center Focus
[SFC, 2CH MIX]
SFC: Appears when you are using an SFC mode
2CH MIX: Appears when you are listening to a multi-channel
source with headphones
General display
Shows the input mode, radio frequency and other general
information.
Shows the input mode, radio frequency and other general
information.
[DIGITAL INPUT]
Lights when input is digital.
Lights when input is digital.
1
2
3
4
5
6
[ % DIGITAL, DTS, % PL
ΙΙ]
Lights to indicate the source's input signal and decoding
format used.
%
%
DIGITAL: Dolby Digital sources
DTS: DTS sources
%
%
PL
ΙΙ: Dolby Pro Logic ΙΙ decoder is being used
7
8
[M]
Flashes or lights during presetting.
Flashes or lights during presetting.
9
10
[W]
Lights when you are using the digital transmitter (
Lights when you are using the digital transmitter (
➡
page 7).
Flashes when there is no link between the main unit and
the wireless system (For details, refer to the operating
instructions for SH-FX67).
1
2
3
4
5
6
2
3
4
5
6
7
9
8
10
TUNED
MONO
SLEEP
PCM
ST
kHz
ft
MHz
DIGITAL DTS
2CH MIX
SFC
M
C.FOCUS
DIGITAL INPUT
PL
W
SC-HT56P_MP (RQTX0175-2P).indb 5
9/19/2008 12:27:59 PM