Samsung AH68-01850K Manual De Usuario

Descargar
Página de 38
GB
22
OPERA
TION
To stop playback, press 
STOP
during playback.
• 
If pressed once, “
PRESS PLAY” is displayed and the stop position will be
stored in memory. If 
PLAY/PAUSE
(         ) button or 
ENTER
button is
pressed, playback resumes from the stop position. (This function works only
with DVDs.)
• 
If pressed twice, “
STOP” is displayed, and if 
PLAY/PAUSE
(         ) button is
pressed, playback starts from the beginning.
To temporarily pause playback, press 
PLAY/PAUSE
during playback.
To resume playback, press 
PLAY/PAUSE
(         ) button again.
DVD
VCD
CD
Playback starts automatically.
Selecting the Video Format
Press and hold 
NT/PAL
button on the remote controller for over 5 seconds
while the power is turned off. 
By default, the video format is set to "PAL".
"
NTSC" or "PAL" will appear in the display. At this time, press the 
NT/PAL
button
shortly to select between "
NTSC" and "PAL".
Each country has a different video format standard. 
For normal playback, the video format of the disc must be the same as the video
format of your TV. 
Disc Playback
2
Load a disc.
Place a disc gently into the tray with the disc’s label
facing up.
Depending on the content of
the disc, the initial screen may
appear different.
1
Press 
OPEN/CLOSE
button to open the
disc tray.
3
Close the compartment by pressing the
OPEN/CLOSE
button again.
Note
21
In this manual, the instructions marked with "DVD (               )" are applicable
to DVD-VIDEO and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
Depending on the content of the disc, the initial screen may appear different.
DVD
Note
Titles and chapters (DVD-VIDEO)
DVD-video is divided into several large sections called "titles" and smaller sections called "chapters".
Numbers are allotted to these sections. 
These numbers are called "title numbers" and "chapter numbers".
TITLE 1
TITLE 2
CHAPTER 1
CHAPTER 2
CHAPTER 1
CHAPTER 2
CHAPTER 3
Tracks (Video and music CDs)
Video and music CDs are divided into sections called "tracks". 
Numbers are allotted to these sections. These numbers are called "track numbers".
TRACK 1
TRACK 2
TRACK 4
TRACK 5
TRACK 3
Files (DivX)
DivX is divided into sections called "files". 
Numbers are allotted to these sections. These numbers are called "file numbers".
FILE 1
FILE 2
Disc terminology
Before Using Your Home Theater
HT-Q20(1~40P)-NOR- GB  3/20/06 9:37 AM  Page 24