Runco LS-3 Series Manual De Usuario
Runco LS-3/LS-5 Installation/Operation Manual
83
PRE
L
IMINAR
Y
7.1
LS-3/LS-5
Specifications
LS-3/LS-5
Specifications
Table 7-1 lists the LS-3/LS-5 specifications.
7. Specifications
Table 7-1. LS-3/LS-5 Specifications
Signal Compatibility
Video Support:
HDMI and DVI with HDCP for digital video, Component
and RGB HDTV (1080p, 1080i, 720p), Component and
RGB EDTV (576p, 480p), Component, Composite and
S-Video SDTV (576i, 480i), RGB SCART with adapter,
NTSC/NTSC 4.43, PAL (B,G)/(D,K)/I/M/N, SECAM
and RGB HDTV (1080p, 1080i, 720p), Component and
RGB EDTV (576p, 480p), Component, Composite and
S-Video SDTV (576i, 480i), RGB SCART with adapter,
NTSC/NTSC 4.43, PAL (B,G)/(D,K)/I/M/N, SECAM
Computer Support:
Digital and Analog up to 1920x1080 @ 60Hz,
Macintosh®
Macintosh®
Communication:
RS-232, IR remote, on-board keypad
Connectivity
(2) HDMI V1.3 with HDCP:
HDTV RGB and Component, EDTV, SDTV, HDMI (High
Definition Multimedia Interface) with HDCP (High
Bandwidth Digital Content Protection), DVI via adapter
Definition Multimedia Interface) with HDCP (High
Bandwidth Digital Content Protection), DVI via adapter
(1) Component (3 x RCA, gold):
HDTV, EDTV, SDTV
SCART RGBS via component and composite inputs
(adapter not included)
SCART RGBS via component and composite inputs
(adapter not included)
(1) Component
(LS-5 only; 3 x BNC, 75 ohm):
HDTV, EDTV, SDTV
(1) RGB (HD15):
HDTV, RGBHV, YUV, EDTV
(1) S-Video (4-pin mini-DIN):
SDTV
(1) Composite (RCA, gold):
SDTV
(1) 3.5mm mini jack (LS-3):
(2) 3.5mm mini jack (LS-5):
(2) 3.5mm mini jack (LS-5):
12V (+/-1.5V) screen trigger (250mA)
(1) 9 pin D-sub:
RS-232 for discrete commands and software upgrades
Communication Parameters: 38400 bps, no parity, 8
data bits, 1 stop bit, no flow control
Communication Parameters: 38400 bps, no parity, 8
data bits, 1 stop bit, no flow control
(1) 3.5mm mini jack:
IR input for Niles/Xantech compatible IR repeater
systems
Communication Protocol: Conforms to NEC standard IR
protocol, 38-kHz carrier frequency, custom code =
0x06F9
systems
Communication Protocol: Conforms to NEC standard IR
protocol, 38-kHz carrier frequency, custom code =
0x06F9