Sony HT-FS3 Manual De Usuario
9
GB
Gettin
g
Sta
rted
To install the speakers on a flat surface
Before you install the speakers, be sure to attach the supplied foot pads to prevent vibration or
movement as shown in the illustration below.
You need to attach the supplied foot pads to both the right and left speakers.
movement as shown in the illustration below.
You need to attach the supplied foot pads to both the right and left speakers.
To install the speakers on the speaker stand
For greater flexibility in positioning the speakers, use the optional WS-FV11 or WS-FV10D speaker
stand (available only in certain countries). For details, refer to the operating instructions supplied with
the speaker stand.
stand (available only in certain countries). For details, refer to the operating instructions supplied with
the speaker stand.
To install the speakers on a wall
You can install your speakers on the wall.
1
Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.
See the illustrations below.
See the illustrations below.
2
Fasten the screws to the wall. The screws should protrude 5 to 7 mm.
3
Hang the speakers on the screws.
More than 25 mm
4 mm
Hole on the rear of
the speaker
the speaker
4.6 mm
10 mm
5 to 7 mm
continued