Sony BDV-E570 Manual De Usuario
46
US
4
Press
X/x to select [S-AIR Settings],
then press
.
The [S-AIR Settings] display appears.
5
Press
X/x to select [RF Change], then
press .
6
Press
X/x to select the desired setting,
then press
.
• [Auto]: Normally select this. The system
changes [RF Change] to [On] or [Off]
automatically.
automatically.
• [On]: The system transmits sound by
searching for the better channel for
transmitting.
transmitting.
• [Off]: The system transmits sound by
fixing the channel for transmitting.
7
Press .
The setting is made.
8
When you set [RF Change] to [Off],
select the ID so that wireless
transmission is most stable (page 43).
select the ID so that wireless
transmission is most stable (page 43).
Note
• In most cases, you will not need to change this
setting.
– If [RF Change] is set to [Off], transmission
between the unit and S-AIR sub unit can be
performed using one of the following channels.
performed using one of the following channels.
– S-AIR ID A: equivalent channel for IEEE
802.11b/g channel 1
– S-AIR ID B: equivalent channel for IEEE
802.11b/g channel 6
– S-AIR ID C: equivalent channel for IEEE
802.11b/g channel 11
• The transmission may be improved by changing the
transmission channel (frequency) of the other
wireless system(s). For details, refer to the operating
instructions of the other wireless system(s).
wireless system(s). For details, refer to the operating
instructions of the other wireless system(s).