Sony 3-299-549-11(1) Manual De Usuario
94
GB
x [AUDIO (HDMI)]
You can select the audio output status from the
HDMI OUT jack.
You can select the audio output status from the
HDMI OUT jack.
Note
• When you connect the control unit and TV with an
HDMI cable and [ON] is selected, [AUDIO DRC],
“A/V SYNC”, TONE, “DEC. MODE”, and sound
mode are not applied to the sound that is output from
the TV.
“A/V SYNC”, TONE, “DEC. MODE”, and sound
mode are not applied to the sound that is output from
the TV.
• When you set the function to other than “DVD”, the
system does not output the sound from the HDMI
OUT jack even if you set [AUDIO (HDMI)] to [ON].
OUT jack even if you set [AUDIO (HDMI)] to [ON].
x [JPEG RESOLUTION]
You can select the resolution of JPEG image
files output from the HDMI OUT jack.
You can select the resolution of JPEG image
files output from the HDMI OUT jack.
Note
• [JPEG RESOLUTION] is effective only when you
set [TV TYPE] in [VIDEO SETUP] to [16:9], and
you set [HDMI RESOLUTION] in [HDMI SETUP]
to other than [720×480/576p].
you set [HDMI RESOLUTION] in [HDMI SETUP]
to other than [720×480/576p].
• You can select [(1920×1080i)HD ]
or
[(1920×1080i)HD] only when you set [HDMI
RESOLUTION] in [HDMI SETUP] to
[1920×1080i].
RESOLUTION] in [HDMI SETUP] to
[1920×1080i].
• If you select [(1920×1080i)HD ]
or
[(1920×1080i)HD], next image appears after black
screen.
screen.
• HDMI signal will stop momentarily when the system
is loading or unloading a DATA CD or DATA DVD
disc.
disc.
x [S-AIR SETUP]
You can set up the S-AIR setting. For details,
see “Using an S-AIR Product” (page 74).
You can set up the S-AIR setting. For details,
see “Using an S-AIR Product” (page 74).
Note
• This function is available only when the S-AIR
transmitter is inserted into the S-AIR
main unit.
x [AUTO CALIBRATION]
You can calibrate the appropriate settings
automatically. For details, see “Calibrating the
Appropriate Settings Automatically” (page 88).
You can calibrate the appropriate settings
automatically. For details, see “Calibrating the
Appropriate Settings Automatically” (page 88).
[OFF]
The system does not output the
sound from the HDMI OUT jack.
sound from the HDMI OUT jack.
[ON]
The system outputs audio signals
by converting Dolby Digital,
DTS, or 96 kHz/24 bit PCM
signals to 48 kHz/16 bit PCM.
by converting Dolby Digital,
DTS, or 96 kHz/24 bit PCM
signals to 48 kHz/16 bit PCM.
[SD ]
The system outputs standard
resolution with a black
frame.
resolution with a black
frame.
[HD ]
The system outputs HD
resolution with a black
frame.
resolution with a black
frame.
[HD]
The system outputs the HD
resolution without a black
frame.
resolution without a black
frame.
[(1920×1080i)HD ]
The system outputs full size
HD resolution with a black
frame.
HD resolution with a black
frame.
[(1920×1080i)HD]
The system outputs full size
HD resolution without a
black frame.
HD resolution without a
black frame.
Settings for the Audio
[AUDIO SETUP]
[ID]
You can set the ID of the S-AIR
main unit.
main unit.
[PAIRING]
You can pair the system and
S-AIR sub unit, such as surround
amplifier or S-AIR receiver.
S-AIR sub unit, such as surround
amplifier or S-AIR receiver.
AUDIO SETUP
AUTO CALIBRATION:
S-AIR SETUP:
DIGITAL IN: TV OPT, SAT/CABLE COAX
OFF
OFF
OFF
AUDIO DRC:
TRACK SELECTION:
TRACK SELECTION: