Yamaha AV1 Manual De Usuario

When you have completed all connections and
adjustments before listening operations, begin listening
to a source on this system.

Press the POWER switch to turn the power on.
* When the power is on, the display on the main

control unit shows the name of currently selected
input source or other information.

Press the VOLUME “

” (or “–”) button to decrease

the volume to minimum until “MIN” is shown on the
display.

Select a source which you want to listen to or watch
by pressing the corresponding input selector button.
* The name of selected input source is shown on

the display.

Play the source.

●

To play a CD on the built-in CD player, see
pages 30 to 32.

●

To listen to a radio program on the built-in
tuner, see pages 33 to 37.

●

To play a source on an external audio/video
unit connected to this system, see page 44.

Press the VOLUME “

” (or “+”) button to increase

the volume.
* Volume level is shown on the display.

If you prefer, use the built-in digital sound field
processor including the Dolby Pro Logic Surround
decoder.

a) Press the DSP ON/OFF button so that a name of

DSP program appears on the display.

b) Select a desired program by pressing the

PROGRAM selector “

” 

or “

” 

button.

(See page 45 for descriptions about programs.)

c) According as you prefer, adjust the delay time,

the center speaker output level and/or the rear
speaker output level. (See pages 47 to 48 for
details.)

d) To switch off the digital sound field processor;

Press the DSP ON/OFF button.
* Sound output becomes 2-channel stereo.