Insignia NS-SB212 Manual De Usuario
6
NS-SB212 Soundbar Home Theater Speaker
www.insigniaproducts.com
2 Plug the other end of the AC adapter into a
power outlet.
Using your soundbar
This system lets you to access three different sound sources (RCA, AUX,
and Optical).
and Optical).
Listening to your soundbar:
1 Press the
(Power) button to turn on your
soundbar. The power indicator turns green.
2 Press the
button on the soundbar or the
remote control repeatedly to select the audio
source you want.
3 Turn on the sound source component
connected to your soundbar and begin
playback. The sound plays through your
soundbar.
playback. The sound plays through your
soundbar.
4 Adjust the volume on your soundbar or the
audio component to a comfortable level.
5 Press the
(Power) button again to turn off
your soundbar. The standby indicator turns on.
Troubleshooting
Check this list for a possible troubleshooting
solution before calling for service.
solution before calling for service.
Specifications
Designs and specifications are subject to change
without notice.
without notice.
Legal notices
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this
product is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within the limits for
a class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
product is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within the limits for
a class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
that to which the receiver is connected.
•
Consult the dealer or an experienced technician for help.
FCC warning
Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the
user’s authority to operate this equipment.
responsible for compliance with the FCC Rules could void the
user’s authority to operate this equipment.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
Note
If you use the OPTICAL IN connection, you must
change your device’s audio output setting to “PCM”
format. Refer to the manual you received with the
output device for additional information.
change your device’s audio output setting to “PCM”
format. Refer to the manual you received with the
output device for additional information.
Warning
Continuous use of high volume sound may
permanently damage your hearing.
permanently damage your hearing.
DC IN
AUX IN
R
L
RCA IN
18V
Problem
Possible Solutions
The power does not
come on.
come on.
• Make sure that the AC adapter is securely plugged into
the power outlet and the soundbar.
The remote control
does not work.
does not work.
• The path between the remote control and the IR sensor
on the soundbar is blocked.
• The remote control battery is exhausted.
No sound or very
low-level sound is
heard from the
soundbar.
low-level sound is
heard from the
soundbar.
• Make sure that the volume level of the soundbar or your
component is set to an adequate level.
•
Make sure that the volume level is not muted. Press the
(mute) button on the remote control again to
restore the sound output.
•
Make sure the correct audio source is selected. Press the
button repeatedly to switch to the correct audio
source.
•
Make sure that the sound
mode is
suitable for the audio
source. Press the
DSP
button to select a proper sound
mode.
Note: The sound modes are memorized for each input, unless you
disconnect the AC adapter from the wall outlet.
disconnect the AC adapter from the wall outlet.
Your soundbar is not
working properly.
working properly.
• Unplug the AC adapter from the wall outlet and then try
plugging it in again after 30 seconds.
Power output
20 W per channel at 10% THD
Frequency response
150 Hz ~ 15 kHz
Subwoofer output
2 V
Dimensions (approx.)
31.5 x 3.5 x 2.76 inches (800 x 89 x 70 mm)
Weight
4.4 lbs. (2 kg)
NS-SB212_12-0388_MAN_EN_V2.book Page 6 Tuesday, April 17, 2012 1:07 PM