Denon AVR-1312 Manual De Usuario

4

• Make connections as follows before using this unit. Select an appropriate connection type 

• You may need to make some settings on this unit depending on the connection method. Refer to 

• Select the cables (sold separately) according to the components being connected.

• Do not plug in the power cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components being 

connected.

• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with connection cables. Doing so can result in noise.

GFlow of video signalsH

HDMI connector

S-Video connector

Video connector

Monitor (TV)

HDMI connector

S-Video  

connector

Video connector

HDMI connector

Video connector

HDMI connector

Video connector

Video device

This unit

• HDMI signals cannot be converted into analog signals (

).

• Analog signals cannot be converted into HDMI signals (

• Menu screen

• Status display screen

When the input source is 
switched

When the volume is adjusted

Speaker Setup

Input Setup

Option Setup

Speaker Config.

Bass Setting

Distance

Channel Level

Crossover Freq.

[    ]

[ENTER] Enter

Return

MENU

SOURCE :  BD

DDDDDDDD

VIDEO:SOURCE

MODE  : STEREO 

 

[HDMI]

Master Volume 

-59.0dB

Status display:  The operating status appears briefly on the screen 

when the input source is switched or the volume is 
changed.

• If you operate the menu while playing back 3D video content or computer’s resolution (e.g. VGA), the 

playback video is replaced by the menu screen. The playback video is not displayed behind the menu 
screen.

• This unit does not show the status display while playing back 3D video content or computer’s resolution 

(e.g. VGA).

• The menu screen and status display are displayed when this unit and a TV are connected by HDMI.