JVC LVT0378-001A Manual De Usuario
16
English
Synchronized recording an MD onto a tape
1
Insert an MD to be played-back into the loading slot,
and load a recordable tape.
The MD IN lamp lights orange.
and load a recordable tape.
The MD IN lamp lights orange.
2
Press
6 (play/pause) button on the MD recorder
or MD
6 (play/pause) button on the remote
control, then press
7 (stop) button immediately to
prepare playing back the MD.
3
Press REC MODE button behind the sliding panel
to select “SYNC REC>TAPE.”
to select “SYNC REC>TAPE.”
4
Press SET button to start recording.
Recording the MD onto the tape starts, and information
appears in the display window as follows:
appears in the display window as follows:
Track number Elapsed playback time
5
Press
7 (stop) button (on either the MD recorder
or the cassette deck) to quit recording as required.
• When all the tracks finished recording, MD recorder
• When all the tracks finished recording, MD recorder
and the cassette deck will automatically stop.
4
Press
` (playback) button on the cassette deck or
TAPE
` (playback) button on the remote control.
Once the cassette deck starts playback, the MD recorder
detects the audio signals and starts recording.
detects the audio signals and starts recording.
Each time you press DISPLAY/CHARA. button,
information switches between the remaining time for
the MD and the elapsed time for the MD alternately.
information switches between the remaining time for
the MD and the elapsed time for the MD alternately.
• If no sound comes in for more than 30 seconds, Sound
Synchronized Recording will stop. “WRITING”
appears in the display window, and you can remove the
MD by pressing
appears in the display window, and you can remove the
MD by pressing
0 (eject) button.
Recording onto a Tape
You can record an MD onto a tape manually and using the
recording mode feature.
• For details on recording operation of TD-UXG6 cassette
recording mode feature.
• For details on recording operation of TD-UXG6 cassette
deck, refer to FS-G6’s Instructions (pages 22 – 24).
Recording an MD onto a tape manually
1
Insert an MD to be played-back into the loading slot,
and load a recordable tape.
The MD IN lamp lights orange.
and load a recordable tape.
The MD IN lamp lights orange.
2
Press
6 (play/pause) button on the MD recorder
or MD
6 (play/pause) button on the remote
control, then press
7 (stop) button immediately to
prepare playing back the MD.
3
Press REC PAUSE button on TD-UXG6 cassette
deck to prepare for recording.
deck to prepare for recording.
4
Press
6 (play/pause) button on the MD recorder
or MD
6 (play/pause) button on the remote
control.
The cassette deck automatically starts recording, and
the information changes as follows:
The cassette deck automatically starts recording, and
the information changes as follows:
Track number Elapsed playback time
5
Press
7 (stop) button (on either the MD recorder
or the cassette deck) to quit recording as required.
• When all the tracks finished recording, MD recorder
• When all the tracks finished recording, MD recorder
and the cassette deck will automatically stop.
Continued
EN11-18.XM-G6[J]/2b
99.12.09, 17:58
16