Hoover U5183-910 Manual De Usuario

PUSH

FIRMLY UNTIL

YOU HEAR A

SNAP OR

CLICK!

Attach handle

Carton contents

Remove all parts from carton and
identify each item shown.
Make sure all parts are located before
disposing of packing materials.

If you need any assistance:

Visit our website at

hoover.com.

Click on the “Service” button to find the service outlet nearest you

OR
Call

1-800-944-9200

for an automated referral of authorized service outlet locations (U.S. only) OR

Call 1-330-499-9499 to speak with a representative in our Consumer Response Center.

Please do not return this product to the store

Continued ➜

1. Cleaner assembly

Hold plug (B) with one hand; upper
handle (C) with other hand.
Push plug into upper handle, align-
ing with opposite end of plug and
push firmly

UNTIL YOU HEAR A

SNAP OR A CLICK.

After ends are connected,

pull on

plug

to make sure it is securely

attached.

1-2

Align the groove (D) on the back of

the

upper

handle with the small pro-

jection (E) on the back of the handle

housing.

Push upper handle down until you

hear a click.

1-3

1-4

1-5

1-1

A. Handle section
B. Cleaner body
C. Cleaning tools and wands

NOTE: Three (3) wands and the floor

brush available on some models
only.

Grasp orange tie wrap (A) and pull
until the black plug (B) comes out of
the handle cavity.

DO NOT

remove orange tie wrap

until step 1-3 is complete.

Note:

The plug will only fit together

one way. If plug is not fitting togeth-
er, check alignment of ends.

After the plug ends are fully con-
nected

, the orange tie wrap (A)

must be removed.

Use caution so as NOT TO CUT
the black power cord.

Discard the

orange tie wrap.

Press button (F) at handle base and

push handle all the way down.