Nilfisk-Advance America RS 501 Manual De Usuario
ENGLISH
SERVICE MANUAL
142
33015500(3)2008-02
RS 501
ELECTRICAL SYSTEM
LOW BEAM AND HIGH BEAM ADJUSTMENT AND BULB REPLACEMENT
Preliminary operations
Drive the machine on a solid and level ground, then engage the parking brake with the lever (66).
Turn the ignition key (76) to OFF position and remove it.
Turn the ignition key (76) to OFF position and remove it.
Bulb replacement
Remove the screws (A) and move the headlight (B).
Replace the burned bulbs.
Install the headlight (B) and fasten it with the screws (A).
Adjust the headlights according to the following procedure.
Replace the burned bulbs.
Install the headlight (B) and fasten it with the screws (A).
Adjust the headlights according to the following procedure.
Low beam adjustment
Use the screws (C) and (D), in the following way:
To adjust the beam vertically, turn the screws (C) and (D) simultaneously;
To adjust the beam horizontally, turn the screws (C) and (D) individually.
To adjust the beam horizontally, turn the screws (C) and (D) individually.
C
A
B
A
D
S300929
1.
2.
2.
3.
4.
5.
6.
4.
5.
6.
7.
•
•
•