Nilfisk-Advance America AX 650 Manual De Usuario

 14

 14

 14

 14

 14 - FORM NO. 56041551 - AquaMAX

™

 / AX 650

14  ENGLISH

14  ENGLISH

14  ENGLISH

14  ENGLISH

14  ENGLISH

When the Control Circuit Circuit Breaker (15) trips, push the button to reset the circuit breaker.
If the circuit breaker trips repeatedly, call your local Nilfisk-Advance Distributor for service.

When the Wheel Drive Circuit Breaker (15) trips, check to see if there is debris wrapped around the wheel axle.  Remove the debris from the axle.

Have the wheel drive motor checked for worn out brushes; repair or replace the motor if necessary.  Push the button to reset the circuit breaker.
If the circuit breaker trips repeatedly, call your local Nilfisk-Advance Distributor for service.

When the Brush Drive Circuit Breaker (15) trips, check to see if the brush height is set too low or if there is debris wrapped around the brush.

Adjust the brush height or remove the debris from the brush.  Push the button to reset the circuit breaker.
If the circuit breaker trips repeatedly, call your local Nilfisk-Advance Distributor for service.

When the Vacuum Motor Circuit Breaker (15) trips, check the Vac Motor Filters (32) and clean or replace if necessary.  Have the vacuum motors

checked for worn out bearings and/or brushes or bearing failure.  Repair or replace the motors if necessary.  Push the button to reset the circuit

breaker.
If the circuit breaker trips repeatedly, call your local Nilfisk-Advance Distributor for service.

Model No.

56212000 / 56212260

Voltage, batteries

V

36V

Battery capacity

Ah

238

Protection grade

IPX3

Sound power level as per ISO 3744 (at operator)

dB(A)/20µPa

76

Gross weight (with acc. and batteries, full tank)

lbs / kg

1,171 / 531

Vibrations at the Hand Controls

m/s

2

<2,5m/s

2