Oreck XL2800H2 Manual De Usuario

SAVE SERVICE CALLS...CHECK THESE FIRST:
• Is the disposable filter dust bag full?
• Are pores of filter dust bag clogged with powder or fine dust?
• Is anything clogging the revolving brush, lower tube, intake

opening, fan housing or connector assembly opening?

• Is the belt in place and turning the brush?
• Are the brush ends in the proper location?
• Does the brush turn freely? Are hair, string or rug fibers wound

around the brush?

8

T

roubleshooting 

G

uide

Not plugged in

properly.

No electricity in

wall outlet.

Plug not firmly in

handle assembly.

Filter bag is full.

Nozzle or intake

pivot clogged. 

Belt is broken or

stretched.

Brush is worn.

Bag tube clogged.

Bag pores are

clogged with fine

dust.

Impeller fan is

broken.

Revolving brush is

not even at both

ends.

Be sure cleaner is

firmly plugged 

into wall outlet.

Check electrical

source–fuse or 

circuit breaker.

Plug firmly in

handle assembly.

Replace filter bag.

See “To Install

Paper Filter Dust

Bag.”

Clear obstruction.

Replace belt.

Replace brush if

bristles do not

extend beyond

base plate.

Clear obstruction.

Change bag.

Return to Service

Center for repair.

Check bearing

seal. Make sure

words “old” or

“new” match at

each end.

Whenever calling, please be sure to have your model and
serial number from data plate. 

©2002 Oreck Holdings, LLC. All rights reserved. All word marks, logos, product configurations, and

registered trademarks are owned and used under the authorization of Oreck Holdings, LLC.